Load data for 9 x 57 Mauser + .358 | 150gr | CutEdge ER Raptor

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 150gr \| CutEdge ER Raptor
Manufacturer SKU:	ER E150 RAPTOR
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	1.147" \| 29.1mm
Caliber:	9 x 57 Mauser load data
Case Length (l3):	2.236" \| 56.8mm
Cartridge Length (C.O.L.):	3.084" \| 78.3mm
Seated Depth:	0.299" \| 7.6mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	64.2 Grains of Water \| 4.17 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B8536_C1243
Last updated:	2025-01-01
Recommended Twist Rate:	1:16 - 1:13

Load data for 44 loads in caliber 9 x 57 Mauser with .358 | 150gr | CutEdge ER Raptor bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	36405	90%	**53	100%
[ADI AR 2219]*	<<locked>>	88%	36492	90%	**66	93%
Accurate 2015	<<locked>>	94%	36100	89%	**49	96%
[Accurate 2495]*	<<locked>>	97%	30472	75%	**13	94%
Alliant AR-Comp	<<locked>>	97%	35027	86%	**92	98%
Alliant Reloder-10x	<<locked>>	90%	35940	89%	**66	97%
Alliant Reloder-7	<<locked>>	83%	36492	90%	**10	98%
[Baschieri & Pellagri 106]*	<<locked>>	87%	36172	89%	**54	94%
[Hodgdon H322]*	<<locked>>	94%	36492	90%	**66	93%
[Hodgdon H335]*	<<locked>>	89%	36521	90%	**66	92%
[Hodgdon H4198]*	<<locked>>	84%	36405	90%	**54	93%
Hodgdon TrailBoss	<<locked>>	96%	28892	71%	**85	100%
IMR 4198	<<locked>>	88%	36129	89%	**13	98%
Norma 200	<<locked>>	87%	36085	89%	**56	98%
ReloadSwiss RS 14	<<locked>>	96%	28427	70%	**21	100%
[Rottweil R 901]*	<<locked>>	96%	35955	89%	**33	92%
[SNPE Vectan SP 10]*	<<locked>>	88%	36071	89%	**59	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	95%	35752	88%	**61	92%
[Somchem S335]*	<<locked>>	97%	36172	89%	**00	93%
Vihtavuori N120	<<locked>>	87%	36361	90%	**10	100%
Vihtavuori N130	<<locked>>	92%	36405	90%	**10	97%
Vihtavuori N133	<<locked>>	97%	34171	84%	**54	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32300	80%	**51	99%
[ADI AR 2219]*	<<locked>>	83%	30385	75%	**02	90%
[Accurate 2015]*	<<locked>>	82%	24047	59%	**11	90%
[Accurate 2495]*	<<locked>>	91%	24047	59%	**20	90%
[Alliant AR-Comp]*	<<locked>>	82%	22002	54%	**69	90%
[Alliant Reloder-10x]*	<<locked>>	81%	26382	65%	**00	93%
Alliant Reloder-7	<<locked>>	81%	33982	84%	**48	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29892	74%	**03	91%
[Hodgdon H322]*	<<locked>>	88%	30385	75%	**02	90%
[Hodgdon H335]*	<<locked>>	86%	33315	82%	**84	90%
[Hodgdon H4198]*	<<locked>>	81%	33069	81%	**69	92%
Hodgdon TrailBoss	<<locked>>	83%	23351	57%	**54	100%
IMR 4198	<<locked>>	81%	29399	72%	**33	95%
Norma 200	<<locked>>	81%	29747	73%	**89	96%
ReloadSwiss RS 14	<<locked>>	81%	22365	55%	**73	100%
[Rottweil R 901]*	<<locked>>	92%	32358	80%	**38	90%
[SNPE Vectan SP 10]*	<<locked>>	85%	32866	81%	**74	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	92%	32547	80%	**79	90%
[Somchem S335]*	<<locked>>	91%	29602	73%	**36	90%
Vihtavuori N120	<<locked>>	81%	30371	75%	**72	99%
[Vihtavuori N130]*	<<locked>>	81%	25440	63%	**15	92%
[Vihtavuori N133]*	<<locked>>	87%	25541	63%	**11	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data